mee wrote:4) Fire up the hex editor and open the TMdl you got from stadiums.dat
5) On the text side look for the letters LOCA 10 lines down. Press after the A.
6) Highlight the next 4 characters, switch to the hex side and read them (say 00 92 17 00)
7) This is where the LOCA section starts. The byte are in reverse order, but the byte itself is correct. (So it would be 179200)
8) Go to said hex point, cut from there to the end of the file, the File-New-Paste-Save.
here is the entire "loca" line -
4C 6F 63 61 90 4F 0F 00 74 00 00 00 00 00 00 00
in step 8, i get confused. I dont understand the term, "end of the file". if i were to do step 8 correctly, would the following be what i am suppose to cut?
90 4F 0F 00 74 00 00 00 00 00 00 00
mee wrote:9) Return to the base stadium. Press SEARCH-FIND and type MMAP. Memorize the hex location.
10) Scroll to the end of the file, press between the file 2 periods on the text side.
11) Press CTRL-E and replace the first number with the location where the MMAP starts.
12) CUT-File-New-Paste-Save
13) You should save your original file (which only contains the TMdl now) with a new name.
i don't think you are giving detailed enough instructions my friend.
i'll list my loca, mmap, and leftover tdml file, to show you what my results;
loca
90 4F 0F 00 74 00 00 00 00 00 00 00
mmap - too long to list, and its only letters and numbers. but i do see in the text all that was in the beginning of the original (tmdl, info, swap, extna, geon, etc etc).
the leftover tdml file is this - also too long to list and it is just periods, strange letters. no "tdml" or other names listed in it.
------------
so let me take you back to those steps, and what exactly i did.
step 9-11;
9) Return to the base stadium. Press SEARCH-FIND and type MMAP. Memorize the hex location.
10) Scroll to the end of the file, press between the file 2 periods on the text side.
here is the complete mmap line -
4D 4D 41 50 02 00 00 00 00 01 02 03 2E 00 29 00
4D 4D 41 50 is the "MMAP".
"Scroll to the
end of the file" - confusing, i dont understand "end of the file".
"press between the file 2 periods on the text side" - i dont understand (your english or lack thereof
). i see "MMAP..........)." what does "the file 2 periods" mean.
11) [b][u]Press CTRL-E and replace the first number with the location where the MMAP starts.
after pressing control e, i replaced the first number with "00". i highlighted everything from that point to the very first number in the whole entire tmdl file.